Pin Badge & Embroidered Iron-on Patch
€7.00
The Sunflower embroidered patch and pin badge are perfect alternatives to the lanyard which can be sewn or ironed onto your jacket, bag or any garment to show you have a disability that is not visible.
Availability:
In stock
SKU
CASUNPACKT7
This pack includes:
- x1 Embroidered Sunflower patch
- X1 Stainless steel circular pin badge
Measurements:
Circular Pin Badge
Size: 30mm diameter with a buttery clip on the back.
Embroidered Sunflower Patch
- Dimension: H5.8 x W5.8cm.
- Material: 100% embroidery with heat seal glue backing. No harmful substance used.
- Washing Instructions: Machine wash, wash inside out, avoid dry cleaning and bleach.
How to apply iron-on patches:
- Garments should be clean and freshly laundered.
- Set iron to 'cotton', no steam for 5 minutes.
- Thoroughly iron the area of the garment where the patch is to be placed.
- Place patch on garment, embroidery facing up.
- Place cloth or light towel over the patch and using a slow circular motion, press firmly for 30 seconds.
- Turn the garment inside out, and iron the back of the patch for 30 seconds
- Let cool for one minute. If the edge of the patch can be lifted, repeat the step above
- Performance of application guaranteed by sewing.
Do not use on unironable fabrics (low melting point) such as nylons, vinyls or leathers.
Iron-on glue needs to cool before you finally test how successful the application is.